WaterOperator.org Blog

Articles in support of small community water and wastewater operators.

Preparing a consumer confidence report

July 1 is around the corner, the deadline for community water suppliers to deliver their annual Consumer Confidence Report (CCR) to their customers. The CCR is a water quality report or a drinking water quality report, and is required under the U.S. Environmental Protection Agency’s Consumer Confidence Report Rule.

Every community water system serving at least 15 service connections and/or 25 people year round must prepare and distribute a report. To assist with preparing these, the EPA provides compliance tools and documents.

Gathering Results

The reports are based on calendar-year data, so your report due to customers this July 1, 2017 will be based on data collected between January and December 2016. CCRs must show the highest level of each detected contaminant (this is usually the value you report to the state to determine compliance) and the range of levels of that contaminant you found during the CCR calendar year assuming more than one sample was collected.

Additionally, the CCR Rule requires that drinking water standards and water sample results are presented as numbers greater than or equal to 1.0 in order to enhance consumer understanding of their drinking water quality. These units are often referred to as CCR units. For conversion assistance, view Converting Laboratory Units into CCR Units.

Writing the Report

Briefly, CCRs must include contact information for your utility, identify the water source, define acronyms and technical terms, report and explain levels of contaminants, explain any violations, variations and exemptions, and finally, include some required educational language. A complete explanation of CCR requirements begins on page 7 of the EPA document Preparing Your Drinking Water Consumer Confidence Report: Guidance for Water Suppliers. The document also includes sample language and definitions you can use, a certification form, and examples of CCRs.

As you begin formatting your CCR report, be sure to check the EPA’s Best Practices Fact Sheet for tips on formatting and language that will make your report easy for customers without your technical knowledge to understand.

Distribution to Customers

Distribution requirements can vary. In some states, the mailing requirement may be waived for systems serving less than 10,000 and substituted with a different option, such as publishing the CCR results in one or more local newspapers. If the mailing requirement is waived and your system serves less than 500, then you do not need to publish in a newspaper, but at least once a year, you must notify customers through a mailed, delivered, or posted notice that the CCR is available from your water system upon request.

In addition to sharing sampling results with your customers, the CCR is an opportunity to share the work you’ve completed to produce their drinking water, manage problems, and introduce future improvements and requirements for your utility.

Information for Your State

And finally, don’t forget to visit WaterOperator.org’s document library to find help documents and samples specific to your state. Simply select your state from the filters and enter a keyword search for “Consumer Confidence Report” or “CCR.”


blog comments powered by Disqus